Homeowners can fix common drywall issues. However, the process might be too bothersome for some people. To avoid the complications and to go through the hassle, homeowners can contact GMP Construction LLC, a drywall installer in Dundalk, MD.
Drywall is perhaps the most common construction material used for walls, ceilings, and any necessary structures at home. This popularity is because it doesn’t only serve several functions. It’s also fire retardant, making it the perfect option for ensuring households’ safety. Whichever household one visits, they’re likely utilizing drywall.
However, while it offers countless benefits and advantages compared to other materials, this doesn’t include immunity to problems and damages. The wall is one fixture at home that gets abused the most. It’s susceptible to scratches, holes, and not to mention water leaks and impacts.
Despite their durability, drywalls can still be subjected to complications. When homeowners experience these, they may end up scratching their heads and ignoring these issues altogether. Neither of these is an adequate solution. Read on for a detailed account of the problems drywalls may exhibit and how homeowners can solve each of them personally.
Drywall Without a Stud
For drywall to be positioned and installed correctly, it must be placed on a solid surface such as a stud. This serves as firm support for the material to avoid cracks or infirmity, especially with its fitting. “Stud-less” drywall can function normally, but this will only last for a short time. If homeowners continuously use it in such a manner, this will only result in cracks and various wall issues.
If the issue involves extended drywall that exceeds the stud, homeowners can easily cut the excess so it hits the stud’s center point. On the other hand, if they’re experiencing the opposite, wherein the drywall can’t reach the stud’s position, homeowners may insert another stud to support the drywall. Overall, the solution must be provided so that the stud receives support from the drywall.
Drywall Is Over-Sanded
Nobody wants an uneven or rough surface. To achieve this, many homeowners may end up vigorously sanding their drywall. Doing so may appeal aesthetically pleasing, but over-sanding can damage the fiberglass or paper covering the seams. It may also compromise the surrounding surface of the drywall, affecting the installation.
As a solution, homeowners must thoroughly research the proper way of sanding drywall before doing the process themselves. These instructions or tutorials can be found simply by clicking a button. For starters, they must install a light source at the wall’s low angle to highlight unequal rises.
Drywall Screws Installed Too Deep
Drywalls are installed using screws or nails. If the process isn’t done correctly, there’s a chance that these fasteners are driven too deep into the drywall’s surface that they end up breaking the board’s paper face. This might only end up cracking the board, which homeowners may think the typical patch-up and repainting can cover. However, this crack can affect the screw’s grip over the drywall rather than just a surface-level issue.
Homeowners can ensure the nails or screws are correctly attached by driving them to the paper’s surface cover. They only need a quarter-turn or half-turn to avoid planting them too deeply into the board’s surface to push it below the surface. By chance the board gets punctured, homeowners don’t need to remove the nail. They must install another nail near the failed one to double the grip.
Drywall Joints Too Tight
Before drywall installation, joints must be made to attach the drywall to the surface. Tight joints are desirable in adding two pieces of drywall side by side. However, adding them too close together can cause problems. Fitting two drywalls snugly beside each other risks either or both breaking.
It’s also essential to add a little space between joints to allow the drywall’s expansion and contraction of the framing members. If placed too tight together, the drywalls may crack during natural seasons of expansions. The only solution to this issue is for the homeowners to allow at least 1/8 inch of space between sheets.
The Perfect Fix
Drywall problems are a hassle. Regardless of the severity, one way or another, they can affect the household’s living quality. One thing homeowners can do to avoid possible complications, assuredly, is to hire companies specializing in drywall production and installation.
A drywall DIY project can be a piece of cake. But once mistakes were to be committed, solving these become incredibly troublesome. Hence, an excellent drywall or remodeling company might be the best and safest option to ensure a quality outcome.
Homeowners need not look any further when it comes to providing the best drywall-related services. GMP Construction LLC is a drywall installer in Dundalk, MD, offering the most satisfactory services in the area. They’re a company whose staffs specialize in drywall installation, assuring their clientele that the best team only handles their needs and demands.
0 Comments
Trackbacks/Pingbacks